Printing Group Membership
A few years ago, there was an utility take print user names, rights,
attributes, etc in a group. I am performing a consolidation. Does anyone
know the utility that print the names, rights, | | 3 | 1 | 11/8/2005 8:35:37 PM |
volume security NW 5.1
how do i find out what type of volume we have on our Sys and Data Vol.
and how cani prevent my users from deleting their home dir?
they keep deleting them by accident
thanks in advanc | | 12 | 2 | 11/7/2005 5:18:24 PM |
Daylight Savings Time adjustments!
Can anyone tell me (in idiot's terms) how to adjust the time on the Novell
file server so the workstations will update correctly? Our network fella
has recently passed away, so we are kinda | | 10 | 0 | 11/5/2005 12:44:48 PM |
Clients unable to connect to newly installed licenses
I have installed netware 6.5 5user e-licences on our netware 5 server using
nwconfig. The default location for the license files on the floppy discs
was a:\licence. However there was a *.nlf f | | 4 | 2 | 11/5/2005 3:23:49 AM |
DHCP 3.13
Error message: DHCP warning: Out of addresses for client X, where X is
MAC address. Fill pool returned error 1. Error 5 adding new IP.
This Netware 5.1 sp8, server is programmed to hand | | 1 | 1 | 11/4/2005 7:56:54 PM |
Server Outage Tool
I'm looking for a utility that will track server outages over a given
period of time and the length of time a server was down. I've found
several utilities that show current uptime but thos | | 5 | 1 | 11/4/2005 5:20:18 PM |
How to prevent Novell time-out password request
We have several users who use the same computer. After the first user
walks away, the Novell signon will reappear after a few minutes. If
another user wants to use the computer, they can't | | 4 | 0 | 11/4/2005 10:52:39 AM |
Alert for low disk space
I've been playing with a SYSLOG utility to gather info from my various
devices.
What I would like is to have it alert me to when any of my Netware servers
are running below some pre | | 1 | 1 | 11/4/2005 1:47:23 AM |
Btrieve version question
I see NW 5.1 SP8 comes with Btrieve 7.51. In the past, I've
updated Btrieve--but this had mostly to do with our ArcServe use
(and bringing the other servers up to the same Btrieve version). | | 2 | 1 | 11/3/2005 10:24:17 PM |
NW 5.1 SP8 not recognizing total memory
I'm configuring a new system (preparing for a Migration).
The system is a Dell PowerEdge 2850 with 8GB RAM.
The BIOS reports 8192 MB ECC DDR2.
The NW Console "Memory" c | | 11 | 1 | 11/2/2005 9:58:54 PM |
Timesync
Hello all,
We have been trying to update our HDCP config, and after a few stops and
starts, and chasing down a few other issues, we are getting a "NDS not
syncronized" err | | 12 | 1 | 11/2/2005 5:00:29 PM |
Can I get a list of directories with set quotas?
Hi,
I need to get a list of the directories that have quotas in a server. It
is a system that has been running for some years with several network
administrators in between and we d | | 4 | 1 | 11/2/2005 11:39:55 AM |
Moving a certiifcate authority
TID 10065940 says that you can move a CA between servers if the CA has
been created with NICI 2.1 & Cert Server 2.0.
Is there any way that we can tel after the fact what versions the | | 2 | 1 | 11/2/2005 11:10:44 AM |
Cache Buffer Memory Percent Miscalculation - Netware 5.1
I have a NW 5.1 server, SP8, with 2 GB of memory. With the 2 GB of memory
the cache buffer memory calculation is 921,112,576 or 43% of the total
server work memory (which the server report | | 16 | 1 | 11/2/2005 7:27:01 AM |
File Compression & NetShield
We have a Netware 5.1 server with SP7 and I have the following questions
about file compression. Our server is scheduled to run the compression
task from 12:00 a.m. to 6:00 am.. However, at | | 4 | 1 | 11/1/2005 11:22:12 PM |
Last Login Time
Has anyone else run into a problem whrere NWadmin is reporting a last login
time that is incorrect. My example is I have a few users that are currently
logged into the system, but nwadmin sh | | 3 | 1 | 11/1/2005 6:46:07 PM |
file system trustee util
Looking for a good util that will tell me User/Group X has explicitely
granted rights to VOLX:\Directory All I want to specify is the
tree/context where the server is and have it go get eve | | 3 | 6 | 11/1/2005 3:27:10 PM |
Simple way to kick users from 5.x server???
Just wondering if anyone knows of a simple way to kick a user from the
server and here is why: All of our students have their own logins. They
are only allowed one concurrent connection. | | 10 | 1 | 10/31/2005 11:56:55 AM |
DNS
My Netware 5 server is setup to be a DNS server. My internet connection
is down for a couple of days and it seems that some of the applications
on my network slow down. If I unload named the | | 2 | 6 | 10/31/2005 2:04:37 AM |
Licene error
Server are on a single LAN. To disable slpda is it okay to rem out the load
line in the autoexec and delete the leaf objects and OU of slp_scope? The
servers are NW 5.l.7 and .8.
| | 5 | 3 | 10/30/2005 11:07:22 PM |
FTP Restrict File
Is there a way of implementing the FTP Restrict file without restarting
the server? I'm running Netware 5.1.
| | 3 | 0 | 10/30/2005 3:30:03 AM |
Schedule Symantec Antivirus
Greetings,
I'd like to figure out a way to unload and then reload Symantec Antivirus CE
on our Netware 5.1 server via a schedule, so that it is not active during
our backup window.< | | 3 | 0 | 10/28/2005 11:16:04 PM |
password change not effective
To Whom It May Concern: I am creating user accounts on a 5.1 SP 7 server
using the option that directs the user to create the password on their first
login. When the user logs in, the password | | 2 | 2 | 10/28/2005 6:08:38 PM |
KB number for 500MB is?
we want to limit the home dir space
thanks
| | 5 | 0 | 10/27/2005 4:54:34 PM |
Schedule Symantec Antivirus
Greetings,
I'd like to figure out a way to unload and then reload Symantec Antivirus CE
on our Netware 5.1 server via a schedule, so that it is not active during
our backup window.< | | 2 | 3 | 10/27/2005 2:17:04 AM |
Sys volume losing free space
Kinda new with Novell 5.1. On the sys volume I had 1.0 gig of free space,
then it went down to 500 MB. I was able to erase some old files, but
something keeps eating up the space. Anyone h | | 3 | 0 | 10/27/2005 2:15:27 AM |
DS repair once a month?
should i run DS repair once a month on all my NW 5.1 Servers?
thanks
| | 1 | 1 | 10/26/2005 3:02:29 PM |
Imanager better?
I just need to know why our NW 5.1 box
eats up so much memory
thanks
| | 2 | 1 | 10/26/2005 3:01:41 PM |
Server won't boot - no device available
I have a Netware SBS 5 server that won't boot up. The RAID 5 container seems to be ok, but the C
partition seems to be corrupt. When I turn the server on it displays the error message - no boot < | | 1 | 6 | 10/25/2005 3:37:56 PM |
Server won't boot - no device available
I have a Netware SBS 5 server that won't boot up. The RAID 5 container seems to be ok, but the C
partition seems to be corrupt. When I turn the server on it displays the error message - no boot < | | 1 | 1 | 10/25/2005 3:37:55 PM |
Help!! Out of space
GWMAIL vol out of disk space. All users get the message every minute; the
server console reports "There are no deleted files using disk space". I did
the usual purge on the vol, bu | | 4 | 1 | 10/25/2005 3:33:31 PM |
Big problem/ user/rights/nds ... need serious help !
We are nw51sp5.
Beginning of the problem :
- some users are unable to connect (like if password is wrong)
- our administrator team changes password ... or delete and recreate the
accou | | 7 | 2 | 10/25/2005 12:32:51 PM |
possible scsi problems
Can someone tell me how to run a diagnostic on a scsi card in a Netware
5.1sp7 server...my issue is with Backup Exec 9.1 occasionally I will
receive an error that points to hardware failure. | | 5 | 3 | 10/25/2005 6:27:52 AM |
possible scsi problems
Can someone tell me how to run a diagnostic on a scsi card in a Netware
5.1sp7 server...my issue is with Backup Exec 9.1 occasionally I will
receive an error that points to hardware failure. | | 1 | 3 | 10/24/2005 4:51:39 PM |
Cannot run batch file
Ok, I'm not totally sure if this is a NetWare issue, but this is what's
happening:
We have a batch file on the server which is called by our Internet
Explorer NAL app as a pre-launc | | 4 | 3 | 10/24/2005 1:48:15 PM |
No banner when printing
Hello,
I run a small 6 user network all in one office. Unless I have the Novell
client installed I cannot turn off the banner when using the print
server. I use the Microsoft clie | | 2 | 1 | 10/23/2005 6:51:42 AM |
deleting corrupted files
I had a server 5.0 drive almost fail. I ghost to a new drive and then
ran DSREPAIR.
Now I have some error messages in the console regarding compressed files
that are corrupted and | | 2 | 0 | 10/22/2005 9:16:11 PM |
"system" login script for all users
I an new to NDS, but an old timer with NW3.12 and would like to specify a
login script that all users under an Org will run, even those that are not
directly under the Org, but are under OU | | 3 | 3 | 10/22/2005 10:53:59 AM |
Licences
I have a 5.1 server which (should have) a 25-user licence. How can I tell
ascertain the actual number of users the server is actually licensed for?
Many thanks in anticipation.
| | 1 | 1 | 10/21/2005 2:14:26 PM |
can't find folder to salvage on NW 5.1
user cut a folder from W2K SP4 paste it on his home dir in one of the sub
folders he's create
and then deletes the folder he paste by accident - we can't seem to locate
the folder in salva | | 4 | 0 | 10/20/2005 1:37:55 PM |
toolbox and long name space
Hello:
I'm trying to use toolbox to copy some files from one server to another
but it doesn't keep long file names. Both of them are Nw51 sp5 and have
long name space.
Is | | 7 | 1 | 10/19/2005 6:50:02 PM |
Login Script Settings
Hi all
I have a login script command to show a name when logging on.
it is:
Welcome to the Network %LOGIN_NAME
This shows the login name (obviously lol) but i would like | | 1 | 0 | 10/18/2005 2:51:51 PM |
RECEIVE FILESYS-5.10-183 ERROR
HI
I USE NETWARE 5.1.
I RECEIVE
"FILESYS-5.10-183
Severe=5 Locus=11 Class=13
Station # (Task 4) has timed out on its op-lock (type 2)"
MESS | | 1 | 0 | 10/17/2005 4:48:11 PM |
Printer broadcasting after SP install
I had NW 5.1 SP2, then I installed SP8 - after I installed SP8 now the
printers are broadcasting when they print. These are varies printers and
all workstations are on W2000. I turned off t | | 3 | 0 | 10/17/2005 11:46:30 AM |
Time source
Hi,
I've just read thru TID10011518 on external NTP source. Do I have to ask
permission to use one of these time sources?
Thanks
John H
| | 3 | 1 | 10/17/2005 1:58:48 AM |
user deleted folder
one of the users here deleted their home dir.
how can i get it back?
NW 5.1 of do we have to get the back up tape?
thanks
| | 8 | 1 | 10/16/2005 6:41:30 PM |
Netware Portal Management
I unable to login into the utility. When I position my mouse pointer over
the login link I notice the below message.
javascript:stophealthapplet(http:/XXX.XXX.XXX.XXX:8008/_login_server_' | | 9 | 4 | 10/15/2005 11:58:15 AM |
TIMESYNC issues on netware 5 server
Hi all.
We have a multiple server environment here (around 9 servers), with our
main primary time server working correctly.
When i try to timesync, one server NEVER sync's, whereas a | | 2 | 10 | 10/13/2005 11:50:34 AM |
Error 634
I am getting this message at the server console time after time,
Could not resolve CN=490-SIMS-NW.0=SIMS in ReadConfigfromDS, error 634
Can anyone tell me what this means? Thanks!< | | 5 | 11 | 10/12/2005 11:24:54 PM |
Changing IP address and Subnet Mask
I would like to change the IP address and subnet mask on a Novell 5.1
server. I can't seem to find any instructions on how to do this. Can anyone
help please?
Regards,
Mike | | 4 | 2 | 10/12/2005 5:22:39 PM |